| Quantity |
Description |
| 1 |
Safety glasses, meets Z87 specifications |
| 1 |
Combination Pliers |
| 1 |
6" Needle Nose Pliers |
| 1 |
7" Diagonal Pliers |
| 1 |
Slip Joint Plier, 4-5" capacity |
| 1 |
Internal/External Snap Ring Pliers Kit reversible (not interchangeable) tips |
| 1 |
4" Vise Grips Pliers w/cutter |
| 1 |
6" Vice Grip Needle Nose Pliers |
| 1 |
10" Vise Grip Pliers w/cutter |
| 1 |
Allen Wrench Set, English |
| 1 |
O- Ring Tool pick |
| 1 |
Penlight (LED recommended) |
| 1 |
16" Rolling Head Bar |
| 1 |
1 lb. Ball Peen Hammer |
| 1 |
"Dead Blow" Hammer, 2 or 3 lb. |
| 1 |
.0015"-.030" Feeler Gauge Set |
| 1 |
Gasket Scraper(minimum 1" wide, short length) |
| 1 |
8" x 5/16" Round File w/handle |
| 1 |
Set screwdrivers, flat tip, 1/4 to 3/8 tip width |
| 1 |
No.1 Phillips Screwdriver |
| 1 |
No.2 Phillips Screwdriver |
| 1 |
No.3 Phillips Screwdriver |
| 1 |
No.4 Phillips Screwdriver |
| 1 |
Telescope Magnet |
| 1 |
Air Conditioning Duct Thermometer |
| 1 |
Brass Drift (3/4) Diameter) |
| 1 |
Center Punch |
| 1 |
1/8"Pin Punch |
| 1 |
5/32" Pin Punch |
| 1 |
1/4 Pin Punch |
| 1 |
3/8" Cold Chisel |
| 1 |
1/2" Cold Chisel |
| 1 |
3/4" Cold Chisel |
| 1 |
Air Chuck (for inflating tires) |
| 1 |
Electric Pliers, Wire Crimper /Cutter/ Stripper |
| 1 |
Combination wrenches (3/8 to 1 1/4") |
| 1 |
Metric Combination Wrench Set (8mm to 24mm) |
| 1 |
1/4 Drive Set (1/4" to 1/2") including Ratchet, Short Extension, Drive Handle
& Universal Joint (6 Point Sockets) |
| 1 |
3/8 Drive Socket Set(3/8" to 7/8") including Long Handle Ratchet, 4" & 6"
extensions, Long Flex Handle, Speed Handle & Universal Joint (12 Point sockets) |
| 1 |
1/2" Drive Socket (3/8" to 1 5/16") including Long Handle Ratchet 3" & 6"
Extensions Approximately 24" Flex Handle, & Universal Joint (12 Point sockets) |
| 1 |
1/4" Drive Metric Socket Set 6 Point (4 mm to 15mm) |
| 1 |
3/8" Drive Metric Socket Set (8mm to 19mm)12 Point |
| 1 |
1/2 Drive Metric Socket Set (10mm to 32mm) 12 Point |
| 1 |
3/8 to 1/4 Adapter |
| 1 |
1/4 to 3/8 Adaptor |
| 1 |
3/8 to 1/2 Adaptor |
| 1 |
1/4 to 3/8 Adaptor |
| 1 |
1/2 Drive Torque Wrench (250 ft. lb.) |
| 1 |
Twist Drill Index 1/16" to 1/2" by 64ths |
| 1 |
3/8 Drive Torque Wrench (100 ft. lb.) |
| 1 |
Flat Nose Snap Ring Pliers(14" Long/ 1 1/2 Opening/wide jaw) |
| 1 |
Flat Nose Snap Ring Pliers (14" Long/ 1 1/2" Opening/Narrow jaw) |
| 1 |
Pistol Grip Air Gun w/ rubber tip |
| 1 |
Ear Protection |
| 1 |
Thread Pitch Gage (English) |
| 1 |
Thread Pitch Gage (Metric) |
| 1 |
6 Point Flare Nut Wrench 1/4'" - 3/4" |
| 1 |
1/2" Drive 3/4" Flare Nut Socket (6 Point) |
| 1 |
1/2" Drive 5/8" Flare Nut Socket (6 Point) |
| 1 |
Metric Allen Wrench Set |
| 1 |
20" Rolling Head Bar |
| 1 |
16" Pinch Bar |
| 1 |
30" Pry Bar |
| 1 |
Tire Pressure Gauge (100 psi capacity) |
| 1 |
Machine Hammer (3 lb. or 4lb.) |
| 1 |
3/8" Drive Impact Flex Socket Set (7/16" to 3/4" 6 point) |
| 1 |
Metric Combination Wrenches (25mm to 32mm) |
| 1 |
Bearing Race Punch(MAC PB37L or equivalent) |
| 1 |
Seal Puller Snap on (YA 105 or equivalent) |
| 1 |
Telescoped Handled Mirror
|
| 1 |
DC volt-ohm-amp meter with 10 amp capability |
.png)
